Filter
Top Products
92
CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641 Switch Configuration
VLAN Parameter Configuration for TrBRF Screen
Use the
VLAN Parameter Configuration for TrBRF
screen to add or change a
BRF. Note that the
trbrf-default
cannot be deleted. Also, the
trbrf-default
cannot be
assigned new BRFs. The BRF screen is shown below.
The following information is displayed on this screen:
VLAN ID
Numeric ID of the BRF. Possible values are
1
through
1005
. Values
1002
through
1005
and
1
are reserved for the default BRFs and CRFs.
VLAN Name
ASCII name associated with the BRF. Up to 32 characters are allowed.
State
Current state of the BRF. Possible values are Operational and Suspended. BRFs in
operational state are functional. BRFs in suspended state do not pass packets. The
default is operational.
MTU
Maximum Transfer Unit of the BRF (maximum size of the information field in
transmitted packets). Possible values are
1,500
,
4,472
(default),
8,144
, and
17,800
.
The actual value used depends also on the value configured for the port (the smaller
value is used).