Filter
Top Products
56
CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641 Installation
Installation Summary
The installation sequence is listed in the steps below.
1. Plan for installation. Read Chapter 3, “Preparing for Installation”.
2. Unpack the switch.
3. Gather the materials.
4. If you will be installing expansion modules, install them now.
5. Mount the switch.
6. Connect the switch to the network.
7. Verify the operation of the switch.
➽ Note:
Complete the following step only if you will be customizing the
configuration of the switch or monitoring its activity.
8. Configure the switch.