Filter
Top Products
79c
Supplies
The following staple cartridge is required as a supply for the saddle stitch finisher:
● AR-SC2
Staple Cartridge (approx. 5000 staples x 3)
FUNCTIONS OF THE SADDLE STITCH FINISHER
■
Sort function
Collates printed pages
■
Group function
Groups printed pages by page
■
Offset function
The offset function offsets each set of output from
the previous set for easy separation. (On the
saddle stitch finisher, the offset function is only
possible using the offset tray.)
The offset function does not operate when the
staple sort function is selected.
■
Staple sort function
Each set of output is collated by the sort function, stapled, and delivered to the upper (offset) tray.
Three stapling positions are available: top left staple, two left staples, or lower left staple.
■
Saddle stitch function
Each set of output is stapled in two places along
the centerline of the paper, folded (with the side
facing up inside), and delivered to the lower (saddle
stitch) tray. In the factory default settings, the
saddle stitch finisher is set to staple and fold sets
after "Pamphlet copy" is performed. If desired, the
"Pamphlet copy" function can be disabled using the
key operator programs.
OutputOriginals
OutputOriginals
Offset function "ON" Offset function "OFF"
"Pamphlet copy" is used to copy two originals onto the front side and two originals onto the back side of each
sheet of paper for easy creation of a pamphlet (See the operation manual for copier).
Note
AR-F14.book 3 ページ ２００４年２月１７日 火曜日 午後３時５７分