Olivetti ECR 5900 Cash Register User Manual


 
11
ENGLISH
Example: Program the first exchange rate as:
1 GBP = 1.471 EURO.
Type/Press:
Foreign Currency Descriptors
You can define a currency descriptor of up to 10 characters
long for each of the four exchange rates programmed. The
descriptor of the foreign currency used will be printed on the
customer receipt during sales transactions that are finalized
with payment in foreign currency, and on the management
reports.
1. Control lock key position: PRG.
2. Press
until displaying the message indicating the
first of the four possible foreign currency exchange rates.
3. To jump to a specific foreign currency to identify, type the
currency number [1 to 4] on the numeric keypad and then
press .
4. Enter the letters or characters of the string you wish to
define and then press . You are now prompted to
identify the following foreign currency.
5. Repeat steps 3 and 4 if you wish to assign a descriptor to
the remaining foreign currencies, if defined.
6. Press
to exit.
Example: Name foreign currency 1 "EURO" by using the
CAPS character table.
Type/Press:
Rounding Option for Swiss, Danish, Swedish
and EURO Currencies
For the Swiss franc, Danish krone, Swedish krona and Euro
currencies, you can program the machine to so that the
amount of a transaction is automatically rounded accordingly
whenever the , or a [tender] key is
pressed. The rounded result will be displayed on the operator
and client displays, printed on the customer receipt and
journal report. The total adjustments are indicated on the
financial reports.
Setting the Rounding Option
With reference to the section "System Options", by setting
Machine Condition 20 to the related value (1, 2, 3 or 4), you
can program the machine to round off the subtotal or tender
values of the related currency.
Decimal Point Position
1. Control lock key position: PRG.
2. Type the status number [0, 1, 2 or 3] to select the desired
format as indicated in the following table:
Status Number Format
0x
1 x.x
2 x.xx (default setting)
3 x.xxx
3. Press to set the new format.
Example: Program the cash register so that three digits
are left after the decimal point.
Type/Press:
Fraction Rounding for VAT Calculation
Fraction rounding is used to round figures with decimals up
or down to the nearest whole numbers and is used for
percent tax and percent discount calculations.
Choose from the following three options to select the round-
ing as needed:
Status Number Fraction Rounding
0 a fraction of a pence is rounded down
one pence
50 a fraction under one-half pence is
rounded down one pence, a fraction
above one-half pence is rounded up
one pence (default setting)
99 a fraction of a pence is rounded up
one pence
1. Control lock position: PRG.
2. Type the status number [0, 50 or 99] to select the desired
fraction rounding.
3. Press
to store the new setting.
Example: Program the rounding code so that a fraction
under one-half pence is rounded down one pence, a
fraction above one-half pence is rounded up one pence.
Type/Press:
Status number
Status number
Exchange rate
ID number
Dec. point position of
exchange rate
Dec. point position of
converted amount
Exchange rate (1.471 Euro)
Exit
Switch to foreign currency definition mode
Confirm entered
foreign currency
descriptor
Exit
New descriptor entry