Filter
Top Products
1
1
2
3
Setting the time and date [Time & Date]
18
EN
Setting the time and date [ Time & Date ]
When you use the recorder for the first time, or when the battery is inserted after the recorder has
not been used for a long time, [ Set time & date ] will appear. When “ Hour ” is flashing, conduct setup
from Step 1.
1
Press the
9
or
0
button to
select the item you want to set.
• Select “ Hour ”, “ Minute ”, “ Year ”, “ Month ” or
“ Day ” by moving the flashing position.
2
Press the + or − button to change
the value.
• Follow the same steps by pressing the
9
or
0
button to select the next item, and
pressing the + or − button to change the
value.
• You can select between 12 and 24 hour
display by pressing the F2 button while
setting the hour and minute.
Example: 10:38 P.M
10:38 PM
(Initial setting)
22:38
• You can select the order of “ Month ”, “ Day ”
and “ Year ” by pressing the F2 button while
setting these items.
If you set the time and date before using the recorder, recording time and date information is automatically stored
for each file. Setting the time and date beforehand enables easier file management.