Olympus LS-14 Microcassette Recorder User Manual


 
4
Erasing
63
EN
Erasing
8
Press the + button to select [ Start ].
Notes
You cannot recover a file once it has been erased.
Please check carefully before erasing.
When an SD card is inserted into the recorder,
be sure to confirm the recording media as either
[ Internal memory ] or [ SD card ] so that there is no
mistake (
P.23, P.72).
Locked files and files set as read-only cannot be
erased (
P.51).
If the SD card is write-protected, [ SD Card Locked ]
will be displayed. If you want to erase a file, please
release the card’s write protection (
P.21).
If there is a file that cannot be recognized by the
recorder, the file will not be erased. Please connect
the recorder to your PC to erase the file.
Replace the battery with a new one in order to
ensure that the battery does not go flat during
erasing. In addition, it may take over 10 seconds to
complete erasing. Never perform operations such
as the following during erasing, as such operations
may damage the data.
1
Disconnect the AC Adapter during erasing.
2
Remove the battery during erasing.
3
Remove the SD card during erasing when
[ SD card ] is selected as the recording media.
You cannot delete folders with the recorder.
9
Press the OK button.
The display changes to [ Erasing! ] and
erasing starts.
[ Erased ] is displayed when the file is erased.
File numbers are reassigned automatically.