Filter
Top Products
1
Setting the time and date [Time & Date]
19
EN
Setting the time and date [Time & Date]
Example: March 24, 2012
3M 24D 2012Y
(Initial setting)
24D 3M 2012Y
2012Y 3M 24D
3
Press the OK button to complete
the setting.
• The clock will start from the set date and
time. Press the OK button when you want
the clock to start.
Notes
• If you press the OK button during the setup
operation, the recorder will save the items that were
set to that point.
• After setup, a message will sound prompting you
to select [ Off ], if voice guidance is not required
and the screen will go into [ Voice Guide ] (
☞
P.74)
setup. If you don’t want the guidance feature, select
[ Off ] (LS-14 only).
While the recorder is in stop mode at the
[ Home ] screen, press and hold the
STOP /
w
(
4
) button to display [ Time & date ]
and [ Remain ]. If the current time and date are
not correct, set them using the time and date
setting. See “ Changing the time and date
[ Time & Date ] ” (
☞
P.75).