Filter
Top Products
5
Menu setting method
67
EN
Menu setting method
Low Cut Filter
The recorder has a Low Cut Filter function to minimize
low-frequency sounds and record voices more clearly.
This function can reduce noise from air conditioners
and projectors and other similar noises.
[ 300Hz ]:
Use this setting when sufficient noise reduction
cannot be obtained with the [ 100Hz ] setting.
[ 100Hz ]:
This setting will reduce the noise generated from air
conditioners and projectors. It is effective for indoor
recording.
[ Off ]:
Disables the Low Cut Filter function.
• To confirm the setting, press and hold the F3 ( INFO )
button at the [ Home ] screen (
☞
P.23).
Plug-in Power
External microphones supported by plug-in power
can also be used. You can configure the recorder
according to whether or not you want to supply
power to external microphones.
[ On ]:
When the plug-in power function is activated,
power will be supplied to any connected external
microphone. Select this option when external
microphones to be supported by plug-in power are
connected (
☞
P.94).
[ Off ]:
Disables this function. Select this option when
external microphones that you do not want to
support with plug-in power are connected.
• Turn the plug-in power function to [ Off ] when
an external microphone that does not need to
be supported by plug-in power is connected, as
there is a risk that noise may be generated while
recording.
Mic Select (LS-14 only)
Select whether or not the built-in center microphone
is to be turned On or Off.
[ Central Mic ON ]:
Recording will be performed in 3-microphone
mode.
[ Central Mic OFF ]:
Recording will be performed using only the built-in
stereo microphones.
• To confirm the setting, press and hold the F3 ( INFO )
button at the [ Home ] screen (
☞
P.23).
2
Select the recording rate.
When [ PCM ] *1 is selected:
[ 96.0 kHz/24 bit ] to [ 44.1 kHz(mono) ] *2
When [ MP3 ] is selected:
[ 320 kbps ] to [ 64 kbps(mono) ] *2
*1 Files saved in the PCM (WAV) format
correspond to BWF (Broadcast Wave
Format), and the date and time that each
file is recorded is added to the file.
*2 Monaural recording.
• For clear recording of musical performances or
choirs, set [ Rec Format ] to any value other than
[ mono ] before starting recording.
• When an external monaural microphone is used
while [ Rec Format ] is set to a stereo recording
mode, audio is recorded to the L channel only.
• To confirm the setting, press and hold the F3 ( INFO )
button at the [ Home ] screen (
☞
P.23).