Filter
Top Products
35
23
Filter1 value: 2-256.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
24
Filter2 value: 2-256.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
25
Decimator: 1-1000.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
101
General Setpoint1.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
102
General Setpoint2.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
103
General Setpoint3.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
104
General Setpoint4.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
111
Output1 Mode 0=manual, 1=general setpoint.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
112
Output2 Mode 0=manual, 1=general setpoint.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
113
Output3 Mode 0=manual, 1=general setpoint.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
114
Output4 Mode 0=manual, 1=general setpoint.
Becomes effective only after a system reset (either
power off/on or using the ‘S’ command).
Float
115
Baud rate for the RS232/RS485 port.
Possible values:
19200, 28800, 38400, 57600, 115200.
Note
The baud rate for the USB need not be defined –
its upper limit is 921,600.
Float