Filter
Top Products
80
Appendix F: Specifications
F.1
Load Cell Input
• 5 Volt excitation for upto 10 load cells (350 Ohm)
• Compatible with 1, 2 & 3 mV/V load cells
• Low noise wide bandwidth amplifier & 24 bit ADC
F.2 A/D
• Very high speed A/D: upto 52,000 samples per second
• 24 Bit A/D with ± 8 million counts for tension and compression applications
F.3 Digital Inputs
• 4 opto-isolated inputs with 10-30 VDC range, each with status LED
• Input #2 configurable as high speed counter
F.4 Digital & Analog Outputs
• 4 opto-isolated solid state relays rated at 50V, 300mA, each with status LED.
Configurable as setpoints or manual outputs.
• Analog output of 0 to 2.5V with 16 bit resolution.
F.5 Standard Interfaces
• USB 2.0 Full Speed compatible
• Combined RS232/RS485
• Multiple boards may be connected via USB or RS232/RS485
• Ideal for PLC based applications
F.6
Software
• LCIC-WIM Calibration Wizard software is included.
• Included is the LCIC-WIM Monitor utility which is a vital tool for analyzing
dynamic load/force systems. It takes full advantage of the board’s speed.
• Also included the LCIC-WIM-SETTINGS utility which gives control to card’s
filters, analog output, filling parameters and other settings.
• An ActiveX interface is supplied for easier programming of user’s application;
however, direct conversation with the board is available either.
F.7
Dimensions (mm)
• Standard OEM model 160 x 100pcb (Eurocard(
• ABS cased option
F.8 Misc.
• Powerful 32 bit / 135 MIPS DSP for high speed onboard processing.
• 8 digit LED display
• On board temperature sensor
• Card includes an integral Fill Mode supplying an independent filling control.