Filter
Top Products
55
6. Maintenance and inspection
Notes
Battery recycling
The unit uses lead acid batteries, which are a valuable recyclable resource. Please recycle.
For information on recycling, please contact our peripheral device repair center.
Pb
Caution (for battery replacement)
Do not put the battery into fire and do not break it.
● The battery may explode or leak dilute sulfuric acid.
Do not use a new battery and an old battery at the same time.
● Dilute sulfuric acid may leak.
● A battery can present a risk of electrical shock and high short circuit current.The following
precautions should be observed when working on batteries:
1) Remove watches, rings, or other metal objects from the hands.
2) Use tools with insulated handles.
3) Wear rubber gloves and boots.
4) Do not lay tools or metal parts on top of batteries.
5) Disconnect charging source prior to connecting or disconnecting batteries terminals.
● Servicing of batteries should be performed or supervised by personnel knowledgeable of
batteries and the required precautions. Keep unauthorized personnel away from batteries.
■ Procedure for recycling the battery
<BU1002SW>
1. Use a screwdriver to loosen (turn clockwise) the 2 screws at the top of the front panel of the unit, until they
turn freely. (The screws cannot be removed from the front panel.) ➀
Pull the front panel towards you to remove it. ➁
Loosen the
2 screws.
Battery connector
Plate cover
Disconnect by holding here.
2. Remove the battery connector from the plate cover ➀ and disconnect the connector. ➁