Filter
Top Products
63
6. Maintenance and inspection
●Replacement fan
For BU1002SW/ BU3002SW rear fan : Model BUF1002S
For BU3002SW front fan : Model BUF3002S
■ Fan replacement procedure
1. Use a screwdriver to loosen (turn counter-clockwise) and remove the 3 cooling fan screws. ➀
Pull the cooling fan toward you to remove it. ➁
Loosen the
3 screws.
Fan recess
Fan
Fan replacement is complete.
4. Insert the fan into the unit’s fan recess. ➀
Use a screwdriver to securely tighten (turn clockwise) the 3 removed screws. ➁
When doing so, make sure the cable does not become pinned under the fan cover.
3. Insert the new fan connector until it clicks into place. ➂
The beep stops, and the "EF" status display lamp turns OFF.
2. While pressing down on the tip of the fan connector ➀, pull it toward you to disconnect it. ➁
The beep stops, and the error lamp turns OFF.
* Different screw locations for BU3002SW front fan.