Filter
Top Products
39
V400-H111/211
User’s Manual
Section 3 Outputting Results
Section 3
Reading 2D Code
Outputting Results
■ Monitor Description
The reading results are displayed in the LCD monitor of the main body. They can be
displayed in four display modes: Normal, Mode A, Mode B and Mode C.
p.51, p.65
◆ Normal
This mode is selected as the default mode (factory setting).
Image area
This area displays the reading status and memory card status.
Text display area
This area displays the read data and conversion data (by the data conversion display
function).
In the case of Normal and Mode A, up to 38 characters can be displayed.
In the case of Mode B, up to 228 characters can be displayed.
Image display area
This area displays images taken by the Camera.
Item Details
Reading status [OK] (green) will appear in the left upper corner of the monitor when the code has
been read successfully. If the NG output is set to ON, [NG] (red) will appear in the
left upper corner of the monitor when reading of the code has failed.
Memory Card A SD mark (blue) appears when a Memory Card is present.
Displays the SD mark in red when the Memory Card is active to indicate that the
Memory Card is being accessed.
Image area
Text display
Image display