Filter
Top Products
64
Section 4 Creating Setting Files Using the 2DCR Configear
V400-H111/211
User’s Manual
Section 4
System Settings
Communication Settings
The settings shown in the following table are set in the [Communication Settings] tab
Page in the Create Setting Data Window.
The default settings are indicated with an asterisk.
The format when FCS is ON is as follows:
For details on FCS calculation methods, refer to FCS Calculation Method.
p.85
Setting item Settings
Baud Rate
9,600
*
, 19,200, or 38,400
Parity
None
*
, odd, or even
Data Length
77 bits or 8 bits
*
Stop Bit
1 bit
*
or 2 bits
Header/Footer Prefix
None*, 02 <STX>, or 1B <ESC>
Suffix
ETX, 0A LF, 0D CR
*
, or 0D0A CR+LF
FCS
ON or OFF
*