Omron V400-H111 Barcode Reader User Manual


 
5
V400-H111/211
User’s Manual
Introduction
Introduction
The V400-H111/211 complies with the international regulations and standards listed below.
Observe the following precautions to ensure safe use of the product.
Installation Environment Precautions
Do not use the product in environments with flammable or explosive gases.
Do not install outdoors.
Power Supply and Wiring Precautions
Use the product with the power supply voltages specified in this manual.
Use the cables specified in this manual.
Keep the power supply cable as short as possible (10 m maximum).
Use a DC power supply with countermeasures against high-voltage spikes (safe
extra low-voltage circuits on the secondary side).
p.29
Other Precautions
Do not attempt to disassemble, repair, or modify the product. Doing so may cause
product failure or a fire.
If the product becomes extremely hot, or abnormal odors or smoke occurs, stop using
the product immediately, turn OFF the power, and consult with your OMRON
representative.
Dispose of the product as industrial waste.
Do not apply pressure or deform the product when disposing of it.
Regulations and Standards
EC Directives EMC Directive:No.89/336/EEC
EN Standards
(European Standards)
EN61326: 1997, +A1: 1998 +A2: 2001 (EMI: Class A)
Power line: 10 m max. Signal line: 30 m max.
Precautions for Safe Use