Sylvania ML-1 Webcam User Manual


  Open as PDF
of 22
 
Seng Up the Sources
What is a source?
A source is any audio storage device that can provide output. Sources include, but are not limited to,
smartphones, iPods®, iPhones®, iPads®, A/V receivers, televisions, radios, computers and MP3 players. In order
for a source to play through the MusicLites speakers, you will need a transmier plugged into the device.
There are 3 transmiers (sources) available for MusicLites:
• Transmier for iPod/iPhone/iPad
• USB Transmier
• Universal Transmier
Each transmier can only be connected to one source at a me. The source is indicated by a mechanical switch
on the side that shows which of three possible opons, S1, S2 or S3 is selected (see FIGURE 6). Source 1 is
the default. Transmiers are independent of the device being transmied from. That means you can unplug
the transmier from that device and plug into another, as long as there is a way to connect. You can have up
to 3 transmiers acve at one me. If you have 3 transmiers connected to devices playing simultaneously,
you can use the remote control, by zone, to toggle between sources S1, S2 and S3. If you are using mulple
transmiers, it is important that you make sure that each is transming as a dierent source number- 1, 2 or
3. Two transmiers playing simultaneously on the same source number will not work.
How do the sources work?
Once you aach a transmier to an audio device, the transmier interprets the signal and transmits it
wirelessly. If the transmier is set as the rst source (S1), all MLs set to pick up S1 will play from that
transmier as long as they are turned on and within range.
How long does it take the MLs to receive and process a command?
Depending on the conguraon and number of MLs in your home, you may need to allow 3 - 6 seconds aer
pressing a S1, S2 or S3 to allow all MLs to receive and respond to that command.
How many sources can I have per zone?
Each zone can only play one source at a me. However, you can switch between the 3 sources (S1, S2, S3) in a
house. Sources can take the form of any number of devices as they are independent from the transmier. You
do not have to buy separate transmiers for each device unless you want to play them all simultaneously in
dierent zones.
Source
Switch
FIGURE 6
9
 previous next