Filter
Top Products
Universal Transmier
(Part number 72287)
What comes with the transmier?
• Universal Transmier
• AC adapter with cord and DC Output
• Cable with 3.5mm mini-jacks on each end
• Remote control
• Easy Installaon Guide
Make sure the house code is set to the proper code (default is 0). If not, take the screwdriver provided
and turn to the correct house code.
Decide what source you want it to play. There is a sliding switch with 3 posions on the side of the
transmier. Slide it to S1, S2 or S3.
Plug one end of the AC power adapter provided into the DC port of the Toslink and the other end into the
wall outlet. The Universal Transmier will not work without power. The red indicator should light up to
indicate that power is established. Then connect the cable provided into the line in port of the Toslink and
connect to the device you want to play (MP3, iPod, computer, etc.).
Make sure the MLs that you want to play are turned on (see ML set-up secon for details). Use the
remote to make sure the MLs are looking to play from the source 1, 2 or 3 you picked (again, check the
ML set-up secon for how to do this).
There should be no need to check your output device since the connector of the mini-jack plugged into
your device will automacally divert the audio signal to the transmier. If it doesn’t, check to make sure
every connecon is ght.
Pick something with audio to play and start it. The light on the transmier should begin to blink between
red and blue as it searches for synchronizaon with the MLs.
When synchronizaon is made, the light will be blue. The MLs will also have a blue light that will light up
momentarily as it receives the signal. The MLs should begin playing. You can use your device to set audio
levels for the MLs. It should not be necessary to adjust bass, treble, etc., and you will want to remove any
exisng EQ or tone sengs. If synchronizaon is not made, check your sources to make sure the MLs and
the transmier are set for the same source; your device should not be set on mute. Be certain the MLs
were not inadvertently muted from the remote control.
What does the Universal Transmier do?
The Universal transmier is a versale device that has two audio inputs:
a. 3.5mm mini-jack connector (will work with the headphone jack output of computers, smartphones,
Apple devices, MP3 players, etc.). There are cables available with mini- jack on one end and le and
right RCA on the other for use with televisions or stereos.
b. Toslink opcal cable for use with a television, CD player, A/V reciever or other digital source.
How does the Universal Transmier work with a computer, MP3 player, Apple device or other audio storage
device with a mini-stereophone jack?
(1)
(2)
(3)
(4)
(5)
(6)
(7)
17