Sylvania ML-1 Webcam User Manual


 
Make sure the house code is set to the proper code (default is 0). If not, take the screwdriver provided
and turn to the correct house code.
Decide what source you want it to play. There is a sliding switch with 3 posions on the side of the
transmier. Slide it to S1, S2 or S3.
Plug the Transmier for iPod/iPhone/iTouch into your Apple device. If the device is turned on, a red light
indicator on the top side of the transmier will light up.
The Transmier for iPod/iPhone/iTouch has a baery inside so you can operate with your Apple device
unaached to a power adapter. It also comes with a wall adapter so you can be charging while operang
the tandem devices. The charging will alternate between the Apple device and the transmier unl they
are both at full baery power.
Make sure the MLs that you want to play are turned on (see ML set-up secon for details). Use the
remote to make sure the MLs are looking to play from the source 1, 2 or 3 you picked (again, check the
ML set-up secon for how to do this).
Pick something with audio to play and start it. The light on the transmier should begin to blink between
red and blue as it searches for synchronizaon with the MLs.
When synchronizaon is made, the light will be blue. The MLs will also have a blue light that will light
up momentarily as it receives the signal. The MLs should begin playing. You will not be able to use your
Apple device sengs to set audio levels for the MLs through use of the 30-Pin connector. It should not
be neccessary to adjust bass, treble, etc., and you will want to remove any exisng EQ or tone sengs. If
synchronizaon is not made, check your sources to make sure the MLs and the transmier are set for the
same source; your Apple device should not be set on mute. Be certain the MLs were not inadvertently
muted from the remote control.
What does the Transmier for iPod/iPhone/iPad do?
By plugging the Transmier for iPod/iPhone/iPad into the 30-pin connector slot on your Apple device, you can
play audio from that device and have it output to the MLs.
How does the Transmier for iPod/iPhone/iPad work?
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Transmier for iPod/iPhone/iPad
(Part number 72469)
What comes with the transmier?
• Transmier for iPod/iPhone/iPad with rechargeable baery included
• AC adapter with cord and DC Output
• Remote control
• Easy Installaon Guide
16