Filter
Top Products
20
2. Basic operations
2-3-4. Selecting key fill
Selecting the key fill signals
In addition to the signals assigned to crosspoints 1 to 7, special fill colors can be used for the key fill signals.
While holding down the [KEY-F] switch in the source selection area, press one of the B bus crosspoint switches
1 to 7 to select the key fill signal. The indicators of the [KEY-F] switch and selected crosspoint switch light (in
amber). Bus images are not used when the fill color has been selected on the menu.
When the [KEY-F] switch in the source selection area is pressed, the menu display is switched to the FILL menu,
and the fill color can now be selected.
Selecting the fill color
The fill color is selected on the menu.
1 Press the [FUNC] switch to light its indicator, and then press the [KEY] switch to display the KEY menu.
2 Turn [F1] to display the FILL menu.
3 Turn [F2], and select COLR (special fill color) from the TYPE item.
4 Turn [F3], and select the fill color from the COLR item.
:-8
$:/
(3/
.(5
3&%
#-&
#-,
643
643
643
643
$0-3
'*--
5:1&
#64
$0-3
8)5