Filter
Top Products
30
3. Setup
Adjustment
Adjust the clock/phase and position of the DVI input signals.
1 Press the [FUNC] switch to light its indicator, and then press the [SETUP] switch to display the SETUP
menu.
2 Turn [F1] to display the DVIPH menu.
3 Turn [F2] to adjust the clock/phase of the analog input signal using the CKPH item.
Adjust this setting so that the noise will be minimum level.
4 Turn [F3] to adjust the horizontal position using the HPOS item.
5 Turn [F4] to adjust the vertical position using the VPOS item.
%7*1)
$,1)
)104
7104