Panasonic AV-HS300G Switch User Manual


 
45
Menu
Submenu Parameter 1 Parameter 2 Parameter 3
Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select.
SETUP IN1–5 Parameter SIG MODE GAIN
1/15 Setting range IN1 to 5 SDI
ANLG
–30 to 30
Default value IN1 to 5 SDI
ANLG
0
DVIIN Parameter MODE SCAL
2/15
Setting range DIG
ANLG
NORM
FULL
Default value DIG
NORM
FS Parameter SIG FS
3/15 Setting range IN1 to 5 ON
OFF
Default value IN1 to 5 ON
FORMT Parameter MODE
4/15 Setting range
1080/59i
1080/50i
720/59p
720/50p
480/59i
576/50i
EXEC ( )
Default value 1080/59i
REF Parameter SYNC GL
5/15 Setting range
BBST
BBAD
TRI
INT
EXEC ( )
Default value BBST
OUPHS Parameter SYS HPHS VPHS
6/15 Setting range 0H
1H
–1320 to 1319
–100 to 100
Default value 1H 0 0
IP Setting range Cursor movement 0 to 255
7/15 Default value 192.168.0.10
MASK Setting range Cursor movement 0 to 255
8/15 Default value 255.255.255.0
GW Setting range Cursor movement 0 to 255
9/15 Default value 0.0.0.0
MAC Display only 12-digit address display
10/15 Default value
BUS Parameter MODE
11/15 Setting range A/B
P/P (PGM/PST)
Default value P/P
4. Setting menu table