Filter
Top Products
24
2. Basic operations
2-5. Freezing the input signals
The input signals can be frozen and used. If any of the input signals has been frozen, the freeze status display
LED lights. While signals are frozen, the tally signals of the corresponding input will not be output.
1 Press the [FUNC] switch to light its indicator, and then press the [FRZ] switch to display the FRZ menu.
2 Turn [F1] to display the FRZ (2/2) menu.
3 Turn [F2], and select the input video signals using the SIG item.
4 Press the [F4] switch to freeze or de-freeze the input image. If it is pressed when the display shows “OFF”,
the input image is frozen, and the display shows “ON”. If it is pressed when the display shows “ON”, the
input image is de-frozen, and the display shows “OFF”.
*/
*/
*/
*/
%7*
'3;
4*(
*/
'3;
0''
0/
When the unit is used with the frame synchronizer function OFF, the output images may be disturbed when
freezing is executed, but the frozen images will not be adversely affected.
The frame synchronizer function will automatically be switched ON.