Panasonic AV-HS300G Switch User Manual


 
50
5. Image transmission functions
<Transmitting images to the unit>
1. Select the mode.
Check that “To HS300” appears in the [Mode] field.
If “From HS300” appears instead, click the Mode button so that “To HS300” appears.
2. When the [Select Image] button is clicked, the file selection dialog box appears on the screen.
Select the image file to be transmitted, and click [OK].
The image is now displayed in the image display area, and its horizontal and vertical dimensions appear in
the [Width] and [Height] fields at the bottom right.
3. In the [Size] field, select the size of the image to be transmitted to the unit.
HD1080 (1920
1080), HD720 (1280 720), SD NTSC (720 488) or SD PAL (720 576) can be
selected as the size. If the image is in a different video format from the ones supported by the unit, the
output will not be displayed properly.
4. In the [Aspect] field, select the scaling method.
If the size of the image to be transmitted and the selected image differ, the image will be automatically
scaled according to one of the following methods.
Full: The size of the image is increased or reduced so that it fits the size selected in the [Size] field. If the
aspect ratio of the image to be transmitted differs from that of the selected image, the ratio between
the horizontal and vertical dimensions will be changed.
Keep: The image is expanded or reduced while its original aspect ratio is kept unchanged.
Any empty spaces in the image will appear black.
5. Click the [Send] button to transmit the image to the unit.
<Transmitting images from the unit>
1. Select the mode.
Check that “From HS300” appears in the [Mode] field.
If “To HS300” appears instead, click the Mode button so that “From HS300” appears.
2. When the [Get] button is clicked, the image is imported from the unit.
The image is now displayed in the image display area, and its horizontal and vertical dimensions appear in
the Width and Height fields at the bottom right.
3. When the [Save Image] button is clicked, the file save dialog box appears on the screen. Select the image
file to be transmitted, and click [Save].