Filter
Top Products
51
Important Information
(You can cancel this operation by pressing the
0
key.)
The confirmation message will be displayed.
<When the hard disk backup function has been enabled>
When the message [The Backup function has been enabled...] appears,
press the
Y
key.
When the message [Computer must be rebooted in order to execute
[Erase HDD]] appears, press the
R
key.
G Press the
Y
key.
Hard Disk Data Erase Utility will start.
H When [<<<Start menu>>>] is displayed, press the
Enter
key.
I The approximate time required for erasing data will be displayed.
Press the
Space
key.
J At the confirmation message, press the
Enter
key.
The operation of erasing the hard disk starts.
z If necessary, the “hard disk data erase” operation can be cancelled
after it has begun by pressing the
Ctrl
+
C
key.
If the operation is cancelled before being completed, a part of data will
not be erased.
K The message "Hard disk data has been deleted" will be displayed.
Remove the Product Recovery DVD-ROM, and press any key to shut
down the computer.
z If a problem occurred during the operation, an error message will be
displayed.