Filter
Top Products
3-2 Loading Documents
36
Loading Documents
3
Loading Documents
Load the documents in the DADF or place it on the Document Glass.
The DADF lets you load a stack of documents for feeding to the scanner
one sheet at a time, and output them after scanning. 50 sheets can be
loaded each time, thus saving time of loading documents manually.
Procedure
Align the lead edges of your documents.
Remove any paper clips, staples and Post-it
®
Notes before making copies.
Load documents face up
(side one should face up in
the case of two sided
copying) against the rear
guide.
The confirmation light becomes lit.
Move the Document Guide
to gently touch the
document.
Note when copying 51 sheets of documents or more
50 documents can be loaded each time, but documents can be added
for continuous scanning up to a total of 700 sheets (350 sheets for
two-sided copying). During the scanning of the first document loaded,
select Next Document on the screen. After scanning has ended, add
documents and press Start to continue scanning other documents.
Select End Job if there are no further documents for scanning.
However, when Stapling, 1 -> 2 Sided, or Multi-Up (N Up) is selected, no
documents can be added for scanning.
Align the lead edges of your
documents.
Document feeder jams may occur if
the Document Guide is not
positioned correctly.
The DADF cannot be used for some
types of documents. See
Loading
documents in the DADF
in
3-1:
Documents
for the details.
For originals of mixed sizes, see
5-5:
Loading Mixed Size Originals (Mixed
Size Originals)
.
Loading Documents in the DADF