Filter
Top Products
4-4 Reducing/Enlarging the Length and Width (Independent X-Y%)
52
Basic Features
4
Select Cancel to cancel the settings.
The machine will automatically
adjust the ratio to 25% if the
calculated ratio is 25% or below, and
400% if the calculated ratio is 400%
and above.
The factory default for Reduce/
Enlarge is 100%.
Reduce/Enlarge can also be
selected on the Features Menu
screen.
The screen on the right has the Tray
6 (High Capacity Feeder), and
Finisher installed.
The machine will make copies of your original based on the ratios calculated
from the measurements of the original and the copy that you have entered.
Procedure
On the Basic Features screen, select Reduce/Enlarge.
Select Independent X-Y%.
Select Calculator %.
Specifying Original/Copy Size (Calculator %)