Panasonic DP-3000 All in One Printer User Manual


 
163
Troubleshooting
Troubleshooting
Starting with:
NOTE
If the printing operation fails, check the following points first:
Connection cables are properly connected.
Length of connection cables is not longer than 20 ft. (6 m).
Power of devices is turned on.
Paper is loaded on the device properly.
Error message is not displayed on device.
The above points can be verified by printing a test page. Refer to the following for procedures for test
page printing:
Windows 95/98/Me [General Tab] (See page 14)
Windows NT4.0 [General Tab] (See page 29)
Windows 2000 [General Tab] (See page 50)
The status of the devices can be verified by the status monitor (See page ).
17
35
58
140