Filter
Top Products
Installation and Configuration (Windows 95/98/Me)
19
Printer Section
button
Specify the method of sending (spool) documents from the program to the printer.
Spool Data Type
Select spool data type (EMF format or RAW format). Specifying RAW format results in longer time before
placing an application operational after printing on the application.
Note: Spooling by EMF format (metafile compression) may cause the following problems on some
application software.
1) Printing result is different from the screen display.
2) Printing requires excessive time.
Enable bidirectional support
Be sure to check the check box for "Enable bidirectional support" when installing the status monitor (See
page 132 ). Printing may be disabled without checking it.
button
Modifies printer port settings.
Spool Settings...
Port Settings...
140