Filter
Top Products
Installation and Configuration (Windows NT 4.0)
37
Printer Section
NOTE
Delete Port...Add Port...
Configure Port...
■
Ports Tab
Print to the following port(s)
Displays a list of available ports for printing (Port), their status (Description) and printers that are
connected to these ports (Printer).
/ button
Adds/deletes a new port or a new network port.
button
Configures the selected port. In case of a parallel port, Transmission Retry should be specified.
Enable bidirectional support
On a printer, this setting enables reception of configuration data and status data from computer. Be sure
to check this checkbox when installing status monitor (See page ). Printing may be disabled without
checking on the checkbox.
Enable printer pooling
Printer spool allows outputting data from one logical printer to two or more printers. With printer spool
enabled, a transmitted printing job is output to the first printer that allows printing.
• Specify time (seconds) waiting for
the
printer to be ready for printing. If a printer is not
ready for printing after
the
specified time has elapsed, an error message is displayed.
• If a timeout error occurs frequently upon printing a large size document, specify a
larger value here.
140