Filter
Top Products
Installation and Configuration (Windows 2000)
71
Printer Section
Binding Margin
Select for ensuring the binding margin upon duplex printing.
Specifying On for Binding moves a printing area vertically or horizontally (for ensuring binding margin). For
specifying a margin in consideration of a double-page spread printing on application, specify Off for Binding.
Width of binding margin is specified on the main unit. (See page 30, copy section)
Staple
Specifying staple printing is allowed if the output bin is set to outer.
Note 1) Staple printing is allowed only with the Electronic Sorting Board (DA-ES200 : For DP-2000 only)
and 1-Bin Finisher (DA-FS200) mounted.
Note 2) Paper is stapled at the top left or at the top right. (See table below.)
Letter
A4
Letter
A4
Letter
A4
Ledger
Legal
A3
FLS
B4
Ledger
Legal
A3
FLS
B4
Letter/A4
Ledger/Legal/
A3/FLS/B4
Letter/A4
Letter
A4
Letter/A4
Letter
A4
Ledger/Legal/
A3/FLS/B4
Letter/A4
Top left
Top right
Top right
Top right
Note) Stapling on Invoice/B5 sheet is not
allowed.
Note) Stapling on Invoice/B5 sheet is not
allowed.
Letter/A4
Top left
Note) Stapling on Invoice/B5 sheet is not
allowed.
Ledger/Legal/
A3/FLS/B4
Top left
Note) Stapling on Invoice/B5 sheet is not
allowed.
Document orientation
Paper orientation
Stapling position