Filter
Top Products
Safety Information
12
Connecting the Cables
LAN Connection Jack
(10Base-T/100Base-TX)
LAN Cable
(10Base-T/100Base-TX Cable)
Insert the plug until a click is heard.
(LAN cable is not included with the product.)
Purchase a Category 5 Cable, compliant with
EIA/TIA 568-A-5 standard.
10Base-T/100Base-TX Ethernet Hub
Ethernet LAN
(10Base-T/100Base-TX)
Cable (Not included)
Ethernet-Token-Ring
Bridge
(Optional Order
No. UE-204006)
ACTIVITY Lamp
Blinks when there is data traffic
on the LAN.
LINK Lamp
Illuminates when connected to the LAN.
Lamp will not turn ON if LAN cable
is defective
(contains breaks).
RJ-11C
Telephone Jack
Plug one end of the
telephone line cable into
the "RJ-11C" telephone
jack supplied by the
telephone company, and
the other end into the LINE
jack on the left side of the
machine. (Refer to the Dialing
Method, see pages 175, and 190)
Telephone Line Jack
You can connect an
additional standard single
line telephone to the
machine. To connect the
telephone, remove the
protective tab on the TEL
jack.
External Telephone Jack
After connecting all cables,
and the Power Cord, turn the
Main Power Switch on the Back,
and the Power Switch on the Left Side
of the machine to the ON position.
Power Switch
RX
LINK