Filter
Top Products
12
Chapter 2 Scan/Email Operations
Scan to the PCMCIA/PC Card
The scanned image will be directly transferred to the memory card into the PCMCIA/PC Card Adapter.
zBe sure to use only PCMCIA/PC Card Adapter (Type II, 3.3 V Operating Voltage Only) for memory card.
zFor types of memory cards that can be used with the PCMCIA/PC Card Adapter, refer to the document that
came with the PCMCIA/PC Card Adapter.
zThe scanned image(s) cannot be saved to the PCMCIA/PC Card if the setting of Function Parameter
“84 SD/PC Card Function” (General Settings > Key Operator) is set to “No”.
For more details on this setting, refer to General Settings in the Operating Instructions (For Function
Parameters) on the provided CD-ROM.
1
Place the original(s).
zFor instructions on how to place originals,
refer to Basic peration Procedure (see
page 6). For more details, refer to Placing
riginals Copy in the Operating
Instructions (for Basic Operations).
2
Press the Scan/Email key.
3
Select “Basic Menu” to configure the
required settings, and then select
“”.
Refer to Scanner Settings (see
pages 40 to 53).
4
Select “Address Book”.
5
Select “SD Card/Hard Drive”.
6
Insert a PCMCIA/PC Card Adapter
with a memory card.