Filter
Top Products
41
Advanced
Operations
Top half
Bottom half
Making an extension copy
Use this feature to enlarge a document to twice the length of the paper that is currently being used in the
paper tray. This feature is used to reverse the film/paper save function (see page 48).
Sample of enlarged copy:
When you wish to enlarge the top half of the document:
1
Insert the documents FACE DOWN.
2
Press (MENU).
Display:
3
Press K, then C D.
4
Press (START/COPY/SET).
¡The unit will start printing.
5
After printing, press (MENU).
Note:
¡You cannot select FINE, SUPER FINE or HALF TONE
resolution for this feature.
¡To make an enlarged copy of the whole page whose
length is as long as, or shorter than the installed paper,
proceed as follows.
First insert the top half of the original document into
the feeder tray and copy. Then turn the original around
and insert the bottom half of the document into the
feeder tray and copy.
COPYING
EXTENSION COPY
SYSTEM SET UP
Original document
Top edge
ABC
Enlarged copy
ABC
DEF
Insert the document into the
unit from the top edge side
FACE DOWN.
(MENU)
(START/COPY/SET)
FACE DOWN
Dial keypad
Enhanced copy features