Filter
Top Products
LC2H
111
Operation mode
Output mode Operation Example when input mode is either addition or Subject:ubtraction
Output maintain/
hold count
Output control is maintained after count-up
completion and until resetting.
During that time, the count display does not
change from that at count-up completion.
Output maintain/
over count I
Output control is maintained after count-up
completion and until resetting. However,
counting is possible despite completion of
count-up.
One shot/
over count
Output control is maintained after count-up
completion for a fixed time (approx. 1 sec.).
Counting is possible despite completion of
count-up.
One shot/
recount I
Output control is maintained after count-up
completion for a fixed time (approx. 1 sec.).
Counting is possible despite completion of
count-up. However, reset occurs
simultaneous with completion of count-up.
While output is being maintained, restarting
of the count is not possible.
HOLD-A
n: Preset value
n01 n–132
0n n–1 1n–3
4
n–4n–2
OFF ON
Subtraction
Addition
Counting able/unable
Able
Output
Unable
HOLD-B
n: Preset value
n n+1 n+2 n+301 n–2 n–132
0–1–2–3n n–1 2 1n–3n–2
Subtraction
Addition
Counting able/unable
Output
OFF ON
Able
SHOT-A
n: Preset value
n n+1 n+2 n+301 n–2 n–132
0–1–2–3n n–1 2 1n–3n–2
Subtraction
Addition
Counting able/unable
Output
OFF ON
One shot pulse width: approx. 1 sec.
Able
SHOT-B
n: Preset value
n n–1 n–2 n–3 n–4
01
n–1
32
0123 4
n n–1
1
n–3n–2
Subtraction
Addition
Counting able/unable
Output
OFF ON
Able
One shot pulse width: approx. 1 sec.
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net