Filter
Top Products
CE MARKINGS OVERVIEW
Counter, Hour Meter conforming to
EN/IEC standards
The Timer, Counter, Hour Meter shown below conform to both EN and IEC standards,
and may display the CE markings.
CE markings and EC
directives
The world’s largest single market, the
European Community (EC) was born on
1 January 1993 (changing its name to
EU in November 1993. It is now always
expressed as EU, apart from EC direc-
tives.) EU member country products
have always had their quality and safety
guaranteed according to the individual
standards of each member country.
However, the standards of each country
being different prevented the free flow of
goods within the EU. For this reason, in
order to eliminate non-tariff barriers due
to these standards, and to maximize the
merits of EU unification, the EC direc-
tives were issued concomitant to the
birth of the EU.
The EN standards were established as
universal EU standards in order to facili-
tate EU directives. These standards
were merged with the international IEC
standards and henceforth reflect the
standards in all countries. Also, the CE
markings show that products conform to
EC directives, and guarantee the free
flow of products within the EC.
Appropriate
EC directives for control
equipment products
The main EC directives that are to do
with machinery and electrical equipment
are the machinery directive, the EMC
directive, the low voltage directive, and
the telecom directive. Although these
directives have already been issued, the
date of their enactment is different for
each one. The machinery directive was 1
January 1995. The EMC directive was 1
January 1996, and the low voltage direc-
tive was enacted from 1 January 1997.
The telecom directive was established by
the separate CTR (Common Technology
References.)
What are EN standards?
An abbreviation of Norme Europeenne
(in French), and called European
Standards in English. Approval is by vote
among the CEN/CENELEC member
countries, and is a unified standards
limited to EU member countries, but the
contents conform to the international
ISO/IEC standards.
Product
classification
Product name EMC directives Low-voltage directives
Timers
Time Switch
LT4H EN 61000-6-4/EN 61000-6-2 EN 61812-1
LT4H-L EN 61000-6-4/EN 61000-6-2 EN 61812-1
LT4H-W EN 61000-6-4/EN 61000-6-2 EN 61812-1
PM4H EN 61000-6-4/EN 61000-6-2 EN 61812-1
S1DXM-A/M EN 61000-6-4/EN 61000-6-2 EN 61812-1
S1DX EN 61000-6-4/EN 61000-6-2 EN 61812-1
PM4S EN 61000-6-4/EN 61000-6-2 EN 61812-1
PM5S EN 61000-6-4/EN 61000-6-2 EN 61812-1
QM4H EN 61000-6-4/EN 61000-6-2 EN 61010-1
A-TB72 EN 61000-6-4/EN 61000-6-2 EN 61812-1
A-TB72Q EN 61000-6-4/EN 61000-6-2 EN 61812-1
Counters
LC4H EN 61000-6-4/EN 61000-6-2 EN 61812-1
LC4H-L EN 61000-6-4/EN 61000-6-2 EN 61812-1
LC4H-S EN 61000-6-4/EN 61000-6-2 EN 61812-1
LC4H-W EN 61000-6-4/EN 61000-6-2 EN 61812-1
LC2H EN 61000-6-4/EN 61000-6-2 EN 61010-1
LC2H preset EN 61000-6-4/EN 61000-6-2 —
Hour Meters
TH13 EN 61000-6-4/EN 61000-6-2 EN 61010-1
TH23 EN 61000-6-4/EN 61000-6-2 EN 61010-1
TH14 EN 61000-6-4/EN 61000-6-2 EN 61010-1
TH24 EN 61000-6-4/EN 61000-6-2 EN 61010-1
TH40 EN 61000-6-4/EN 61000-6-2 EN 61010-1
TH50 EN 61000-6-4/EN 61000-6-2 EN 61010-1
TH63 EN 61000-6-4/EN 61000-6-2 EN 61010-1
TH64 EN 61000-6-4/EN 61000-6-2 EN 61010-1
LH2H
TH8
EN 61000-6-4/EN 61000-6-2
EN 61000-6-4/EN 61000-6-2
EN 61010-1
LH2H preset EN 61000-6-4/EN 61000-6-2 —
—
If the relevant EN standard does not
exist, it is necessary to obtain approval
based on the relevant IEC standard or, if
the relevant IEC standard does not exist,
the relevant standard from each country,
such as VDE, BS, SEMKO, and so forth.
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net