Filter
Top Products
51
Adjusting the picture
Switching the picture mode
The user can switch to the desired picture mode suitable for the image source and the environment in which this
projector is used.
PICTURE
PICTURE MODE DYNAMIC
COLOR 50
TINT 30
COLOR TEMP. DEFAULT
GAMMA 2.2
CONTRAST 32
BRIGHT 32
SHARPNESS 6
NOISE REDUCTION 2
DYNAMIC IRIS 1
:MENU SELECT
:CHANGE ENTER:REGISTER
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
SECURITY
:MENU SELECT
ENTER:SUB MENU
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select “PICTURE” with the
buttons.
Press the “ENTER” button.
The PICTURE screen will be displayed.
Select “PICTURE MODE” with the
buttons.
Switch “PICTURE MODE” with the
buttons.
DYNAMIC: The picture becomes suitable for the
use in well-lighted areas.
GRAPHIC: The picture becomes suitable for input
from to the personal computer.
USER: The COLOR, TINT, COLOR TEMP. and
GAMMA settings can be adjusted.
STANDARD: The picture becomes suitable for
moving images in general.
CINEMA: The picture becomes suitable for movie
sources.
NATURAL: The picture complies with sRGB.
• Factory defaults are “GRAPHIC” for RGB system and
“STANDARD” for moving images.
• When the “ENTER” button is pressed while
"PICTURE MODE" has been selected, the picture
mode which has been selected can be saved and
used as the presetting when new signals are input.
COLOR, TINT, COLOR TEMP. and GAMMA settings
are saved.
PICTURE MODE
GRAPHIC
DYNAMIC
USER
STANDARD
CINEMA
NATURAL