Filter
Top Products
77
Automatic adjustment
(Only for RGB input)
Use this setting when adjusting a specific or oblong
(16:9, etc.) signal.
Press the MENU button.
The MAIN MENU screen will be displayed.
Select “OPTION” with the
buttons.
Press the ENTER button.
The OPTION screen will be displayed.
Using the buttons, select “AUTO
SETUP”.
Press the ENTER button.
The AUTO SETUP screen will be displayed.
Using the buttons, switch to the
desired mode.
“DEFAULT”: to receive signals of which image
aspect is 4:3 or 5:4
“WIDE”: to receive signals of which image
aspect is 16:9 (oblong)
“USER”: to receive signals of specific horizontal
resolution (number of horizontally
displayed dots)
If “USER” is selected, enter the
horizontal resolution of signal source
into “number of horizontally displayed
dots” using buttons.
Press the ENTER button.
Execute automatic adjustment.
A message “PROGRESS...” appears during
automatic adjustment.
When the adjustment is complete, the system
returns to the input screen.
MODE
DEFAULT
WIDE
Applicable resolution
640 x 400, 640 x 480, 800 x 600, 832 x
624, 960 x 720, 1 024 x 768, 1 152 x 864,
1 152 x 870, 1 280 x 960, 1 280 x 1 024,
1 600 x 1 200, 1 400 x 1 050
720 x 400, 848 x 480, 1 280 x 720,
1 120 x 750, 1 376 x 768, 1 600 x 1 024
Video setting
This feature allows the user to select the signaling
system according to the connected device.
Select “VIDEO SETTING” from the
“OPTION” screen and press the ENTER
button.
The “VIDEO SETTING” screen will be displayed.
Use the buttons to select
"VIDEO" or "S-VIDEO".
Use the buttons to select “AUTO
1” or “AUTO 2”.
“AUTO1”: The system is automatically selected from
among NTSC, PAL, SECAM, NTSC4.43 and
PAL60.
“AUTO2”: The system is automatically selected from
among NTSC, PAL-M and PAL-N.
Note
• When ET-MD95VM2 (optional) is
mounted, an item of “VIDEO SELECT” will
appear on the “VIDEO SETTING” screen
allowing the used to select either “LINE or
Y/C” or “YCbCr”.