Filter
Top Products
78
Option settings
Fan control
When using the projector over 1 400 m (4605.3')
above sea level, set to “HIGHLAND”.
FAN CONTROL NORMAL
HIGHLAND
OPTION
OUTPUT RESOLUTION SXGA+
AUTO SIGNAL ON
FAN CONTROL NORMAL
P IN P OFF
FUNC1 P IN P
PASSWORD
:MENU SELECT
:CHANGE
OPTION
OUTPUT RESOLUTION SXGA+
AUTO SIGNAL ON
FAN CONTROL NORMAL
P IN P OFF
FUNC1 P IN P
PASSWORD
:MENU SELECT
:CHANGE
Output resolution
(D7700U only)
Pictures projected onto a screen (for SXGA) with a 5:4
aspect ratio can be displayed with the SXGA
resolution.
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select “OPTION” with the
buttons.
Press “ENTER” button.
The OPTION screen will be displayed.
Select “OUTPUT RESOLUTION” with
the buttons.
Auto signal
When unregistered signals are to be input frequently
because the unit is used at conferences or other
venues, the screen display position can be adjusted
automatically without having to press the AUTO SET
UP button on the remote control each time.
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select “OPTION” with the
buttons.
Press “ENTER” button.
The OPTION screen will be displayed.
Select “AUTO SIGNAL” with the
buttons.
Switch between “SXGA+” and “SXGA”
with the buttons.
SXGA+ (1 400 x 1 050): For projecting pictures
onto a screen with an
aspect ratio of 4:3.
SXGA (1 280 x 1 024): For projecting pictures
onto a screen with an
aspect ratio of 5:4.
Switch between “ON” and “OFF” with
the buttons.
If unregistered signals are input when “ON” is
selected, auto setup will be initiated automatically.