Filter
Top Products
66
How to use ADVANCED MENU
Press the “MENU” button.
The MAIN MENU screen will be displayed.
Select “ADVANCED MENU” with the
buttons.
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
SECURITY
:MENU SELECT
ENTER:SUB MENU
How to switch the input impedance (signal level) of the
synchronization signal
When the ET-MD95RGB input module (sold separately) is mounted, the user can switch the input impedance
(signal level) of the synchronization signal with the analog RGB input.
Choose 75 Ω when connecting with the equipment whose synchronization output impedance is 75 Ω such as a
signal selector, or switch to HI-Z (TTL) when connecting with the equipment whose synchronization output is TTL
such as a video card of a PC.
Edge blending adjustment
(continuing)
BRIGHT ADJUST
BRIGHT INSIDE 6
BRIGHT OUTSIDE 6
UPPER 0
LOWER 0
LEFT 0
RIGHT 0
Projection range Edge blending width (right)
BRIGHT adjustment (right)
Marker
BRIGHT INSIDE BRIGHT OUTSIDE
Select the “BRIGHT ADJUST” with the
buttons.
Press the ENTER button.
The BRIGHT ADJUST screen will be displayed.
Select the “BRIGHT INSIDE” with the
buttons.
Adjust the compensation value (0-255)
with the buttons.
Select the part of Upper, Lower, Right,
Left with buttons.
With the buttons, adjust the width
(0 to 255) where no BRIGHT INSIDE
compensation is to be provided.
Select the "BRIGHT OUTSIDE" with the
buttons.
Adjust the compensation value (0-255)
with the buttons.
• The BRIGHT adjustment is a function for making the brightening of the BRIGHT level in those areas
where the pictures overlap less conspicuous when multi-screens have been configured using edge
blending. The optimal point is where, after the BRIGHT INSIDE has been adjusted, the compensation
amount is the same for the BRIGHT levels in the areas where the pictures overlap and where the
pictures do not overlap. If, after the BRIGHT INSIDE adjustment, only the vicinity of the borders of the
areas where the pictures overlap and where the pictures do not overlap becomes bright, proceed to
adjust the top, bottom, left and right widths. Alternatively, if only the vicinity of the borders has
darkened as a result of the width adjustments, proceed with the BRIGHT OUTSIDE adjustment.
• When a rear screen or screen with a high gain is used, the joints may appear to be discontinuous
depending on the viewing position.
Note