Filter
Top Products
95
Monitor information page
Displays the status of input slot.
Displays temperature of projector
exhaust.
Displays the lamp lit hours.
Displays used hours of the projector.
Displays self-diagnosis information.
Displays the firmware version
of the projector main unit.
Displays the type of
projector.
Displays temperature of projector’s
intake air.
Displays temperature inside the
projector.
E-mail setting page
• This page allows the user to send mail to up to two mail addresses
automatically.
Select “Enable” to
use the E-mail
function.
Enter the IP address of
the E-mail server
(SMTP).
The user can enter the
location of, for example,
the installed projector so
that the recipient may
easily identify the
originator of the E-mail.
(maximum 63 characters)
Enter the E-mail address
of the projector.
(maximum 63 characters)
The user can modify the
minimum time interval of
temperature warning mail.
The default value is 60
minutes. In this case, the
user cannot send another
mail for 60 minutes after
sending previous temperature
warning mail even the set
warning temperature is
reached again.
The user can modify the
threshold temperature for
sending temperature
warning mail. If the
temperature rises above
the set value, control
sends temperature
warning mail.
Enter the E-mail address
of your desired recipient.
(Continued on next page)