Filter
Top Products
COLOR
(S-VIDEO/VIDEO/YPBPR only)
Press the H button to make the
color more vivid in tone, and press
the I button to make the color
more pastel in tone.
TINT
(NTSC/NTSC 4.43/YPBPR only)
This adjusts the flesh tones in the
picture. Press the H button to make
flesh tones more greenish, and
press the I button to make the
flesh tones more reddish.
BRIGHT
This adjusts the darker areas (black
areas) in the picture. Press the H
button if dark areas are too solid (for
example, if hair is difficult to see), and
press the I button if black areas are
too light (grey rather than black).
CONTRAST
This adjusts the contrast of the
picture. Press the H button to make
the picture brighter, and press the
I button to make the picture
darker. (Adjust the BRIGHT setting
first if required before adjusting the
CONTRAST setting.)
SHARPNESS
Press the H button to make the
picture details sharper, and press
the I button to make the picture
details softer.
Noise Reduction (NR)
(Only for PT-L720U, when S-
VIDEO/VIDEO/YPBPR signals are
being input)
If the signal is of such poor quality
that picture interference appears, you
can suppress this interference by
adjusting the NR (Noise Reduction),
except for 750p (720p), HDTV60
Use the F and G buttons on the
projector or remote control unit to
select an item, and then use the I
and H buttons to change the setting
for that item.
For items with bar scales, press the
ENTER button or the I or H buttons
to display the adjustment screen, and
then use the I or H buttons to make
the adjustment.
When an S-VIDEO/VIDEO signal is being input
35
Basic Operation
34
Adjusting the picture
COLOR TEMP. STANDARD
[
HIGH
[
LOW
PICTURE MODE STANDARD
[
DYNAMIC
[
NATURAL
PICTURE
PICTURE MODE STANDARD
COLOR TEMP. STANDARD
BRIGHT 32
CONTRAST 32
SHARPNESS 0
W-BAL R 32
W-BAL G 32
W-BAL B 32
SIGNAL MODE SVGA
STANDARD
SELECT ADJ ESC
PICTURE
PICTURE MODE STANDARD
COLOR TEMP. STANDARD
COLOR 32
TINT 32
BRIGHT 32
CONTRAST 32
SHARPNESS 2
NR 1
TV-SYSTEM AUTO1
STANDARD
SELECT ADJ ESC
When an RGB signal is being input
PICTURE
PICTURE MODE STANDARD
COLOR TEMP. STANDARD
COLOR 32
TINT 32
BRIGHT 32
CONTRAST 32
SHARPNESS 2
NR 1
SIGNAL MODE 525I
STANDARD
SELECT ADJ ESC
When an YPBPR signal is being input
PICTURE MODE
Select the picture mode that best
matches the image source and
room conditions.
The mode best used in dark rooms
is NATURAL. For rooms having
regular lighting conditions in use,
select STANDARD. For
exceptionally bright rooms, use
DYNAMIC.
This is used to adjust the white
areas of the picture if they appear
bluish or reddish.
Color Hue Setting (color
temperature)
AUTO1 The projector automatically
distinguishes between NTSC/NTSC
4.43/PAL/PAL60/SECAM signals.
AUTO2 The projector automatically
distinguishes between NTSC/PAL-
M/PAL-N signals.
NOTE:
BThis should normally be set to
“AUTO1” or “AUTO2”. If the
signal is of such poor quality that
the correct format cannot be
automatically distinguished,
change the setting manually to
the required TV system.
TV SYSTEM AUTO1
[
AUTO2
[
NTSC
[
NTSC4.43
[
PAL
[
PAL-M
[
PAL-N
[
SECAM
TV SYSTEM
(S-VIDEO/VIDEO only)
(1080i/60) and HDTV50 (1080i/50)
signals. To strengthen the effect,
press the H button. To turn it off , set
to “0” by pressing the I button.