Filter
Top Products
43
Advanced Operation
42
Changing the display language
Use the F and G buttons on the projector or remote control unit to select a
language, then press the ENTER button to accept the setting.
Indicates the language which is
currently set
LANGUAGE ENGLISH
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
ITALIANO
SELECT ENTER ESC
Using the shutter function
The shutter function can be used to momentarily turn off the picture and
sound from the projector when the projector is not being used for short
periods of time, such as during breaks in meetings or when carrying out
preparation. The projector uses less power in shutter mode than it does in
normal projection mode.
#Press the SHUTTER button on the remote control unit.
You can also select SHUTTER from the MAIN MENU screen and then
press the ENTER button.
$Press any button on either the projector or remote control unit to
return to normal operating mode.
CONTROL KEY
To make the buttons on the
projector not function, set
CONTROL KEY to OFF.
To use the buttons on the projector,
set to ON. (page 14)
Using the INDEX WINDOW function
This function lets you store a picture which is being projected into memory,
so that you can display a still picture and a moving picture on the screen.
CONTROL KEY ON
[
OFF
#Press the FUNC1 button.
You can also select INDEX WINDOW from
the MAIN MENU screen and then press the
ENTER button.
NOTE:
BThe aspect ratio of the screen changes and
the image is vertically elongated in
comparison to a normal image.
Still
picture
Moving
picture
$Use the F and G buttons to select a screen size.
When the screen size is changed, the picture’s aspect ratio will also change.
Still
picture
Moving
picture
Still
picture
Moving
picture
Still
picture
Moving
picture
Still
picture
Moving
picture
Moving
picture
Still
picture
NOTE:
BMake sure that you fully understand the notes on ASPECT which are
given on page 38 before using the index window function.
%Use the
II
and
HH
buttons to switch between the still picture screen
and moving picture screen.
&Press the ENTER button to capture the present moving picture in a
still window.
NOTE:
BWhen steps $ and % are carried out, the present moving picture will be
captured in a still window also.
BWhen the input signal is changed, this function will be cancelled.
FUNC 1
This assigns a function to the FUNC1
button of the remote control unit .
INDEX
B
Functions in the same way as the
INDEX WINDOW function. (page
43)
KEYSTONE
BFunctions in the same way as
when “KEYSTONE” is selected
from the MAIN MENU screen.
(page 33)
FUNC1 INDEX
[
KEYSTONE
Select INDEX from the FUNC1 item in the OPTION2 menu to use this
function. (Refer to page 42.)