Filter
Top Products
15
Preparation
14
Remote control unit
#Power indicator
(pages 26 and 27)
This indicator illuminates red when
the MAIN POWER switch is turned
on (standby mode), and illuminates
green when the power is turned on
and a picture starts to be projected.
$RGB INPUT indicator
(page 17)
This indicator shows whether a
signal is being input to the RGB
input connectors (RGB 1 IN/RGB
2 IN). When an input signal is
detected, the indicator illuminates.
%LAMP indicator
(page 47)
This indicator illuminates when it is
time to replace the lamp unit. It flashes
if a circuit abnormality is detected.
&Input select (INPUT, RGB,
VIDEO) buttons
(page 26)
'TEMP indicator
(page 46)
This indicator illuminates if an
abnormally high temperature is
detected inside the projector or around
it. If the temperature rises above a
certain level, the power supply will be
turned off automatically and the
indicator will illuminate or flash.
(POWER button
(pages 26 and 27)
)AUTO SETUP button
(pages 17 and 26)
If this button is pressed while a picture
is being projected, the projection
settings will be adjusted automatically
in accordance with the signal being
input. In addition, the angle of tilt of
the projector will be automatically
detected and adjusted in order to
correct any keystone distortion.
(“AUTO SETUP” will appear on the
screen during adjustment.) Set
“AUTO KEYSTN” in the OPTION1
menu to “OFF” to prevent any
deterioration of the picture as a result
of keystone correction.
*SHUTTER button
(page 42)
This button is used to momentarily
turn off the picture and sound.
+MENU button
(pages 28 and 30)
This button is used to display the menu
screens. When a menu screen is being
displayed, this button can be used to
return to a previous screen or to clear
the screen.
,Arrow (
FFGGII
and
HH
) buttons
(page 30)
These buttons are used to select and
adjust items in the menu screens.
*When in computer operating mode,
these buttons function differently.
(page 19)
-ENTER button
(page 30)
This button is used to accept and
to activate items selected in the
on-screen menus.
*When in computer operating mode,
this button operates differently.
(page 19)
.Laser emitter
(page 18)
/Infrared emitter
(page 20)
0Click button
(page 19)
This button can be used when the
operating mode select switch is
moved to the left (Computer).
1PAGE button
(page 19)
This button can be used when the
operating mode select switch is
moved to the left (Computer).
2Operation indicator
(page 18)
This indicator illuminates while a
laser beam is being emitted (while
the LASER button is being
pressed). It flashes when any other
buttons are being pressed.
3LASER button
(page 18)
A beam of laser light is emitted while
this button is being pressed. This
laser beam can be used as a pointer
to point to something on the screen.
4FREEZE button
(page 31)
This button is used to momentarily freeze
projection so that a still picture is displayed.
5D.ZOOM +/- buttons
(page 32)
These buttons are used to
enlarge the projected image.
6VOLUME +/- buttons
These buttons are used to adjust the
volume of the sound output from the
projector’s built-in speaker. Refer to
page 28 for details on how to adjust
the volume using the buttons on the
projector control panel.
7FUNCTION (FUNC1) button
(pages 33, 42 and 43)
This button is used to enter into the
keystone distortion correction mode,
and it can be used to split the screen
into one frozen image and one moving
image (INDEX menu item). Use the
FUNC1 item in the OPTION2 menu to
select which of these two operations
you want to use with this button.
8STD (standard) button
(page 31)
This button is used to reset the
projector adjustment values to the
factory default settings.
9Operating mode (Computer,
Projector) select switch
(page 19)
Move this switch to the left side to
use the remote control unit to
operate a computer, and move it to
the right side to operate the projector.
SHUTTERPOWER
AUTO SETUP
INPUT
TEMP
LAMPRGB INPUT
ENTER
MENU
ON(G)
STANDBY(R)
POWER
RGB
VIDEO
R-CLICK
LASER
MENU
PA GE
ENTER
FREEZE SHUTTER
FUNC1
Computer Pro jector
STD
SETUP
AUTO
(
&
)
2
3
+
1
,
-
4
*
8
5
6
7
9
.
(
/0
)
'
&
%
$
+,
-
*
#
Projector control panel