Filter
Top Products
17
The projection lenses and input modules which are available for use with this projector need to be purchased
separately and must be installed to the projector before the projector can be used.
• Obtain the required projection lenses and input modules beforehand in accordance with the projection
distance and the system used.
• When installing an optional input module, refer to page 28 for details.
Install a projection lens (sold separately) which is appropriate for the projector setting-up conditions.
Setting procedure
Remove the lens caps (one each at front and back) from the projection lens.
Insert the projection lens into the lens holder and turn it clockwise until it is securely in place.
• Because a projection lens is considerably heavy, be careful not to drop it during installation.
• If inserting the projection lens into the lens holder too strongly, the lens may jam into the holder.
To prevent this problem, do this work carefully.
Before using the projector
NOTE
Installing the projection lens
Lens holder
Projection lens
NOTE