Filter
Top Products
90
Specifications
PT-D9510U
PT-D9610U
(PT-D9510U)
(PT-D9610U)
PT-D9510U
PT-D9610U
200 V – 240 V AC (single-phase, 3-wire), 14 A (Max.)
2.2 kW
Approx. 13 W during standby (when cooling fan is stopped)
0 °C – 40 °C : NORMAL lamp power
0 °C – 35 °C : HIGH lamp power
If the power is turned on when the temperature is around 0
°
C, a warming-up time
of about five minutes will be required before a picture can be projected.
Temperature: −25 °C – 65 °C Humidity: 10 % – 80 %
(with no condensation)
Element size: 0.9 inches (aspect ratio ; 4:3) : PT-D9510U
: 1.1 inches (aspect ratio ; 5:4) : PT-D9610U
Display method: 3 DMD
TM
elements, DLP
TM
system
Pixels: 1 024 dots
✕ 768 lines, (3 sheets) : PT-D9510U
: 1 280 dots
✕ 1 024 lines, (3 sheets) : PT-D9610U
1 600 W Xenon lamp (recommended replacement period 1 000 hours)
9 000 lm ANSI : LAMP POWER NORMAL
10 000 lm ANSI : LAMP POWER HIGH
10 000 lm ANSI : LAMP POWER NORMAL
12 000 lm ANSI : LAMP POWER HIGH
Ceiling or Floor/Front or Rear (menu selectable)
Max. elevation angle : ±10 ° or less
Top and bottom : 10/0
–
0/10 Left and right : 8/2
–
2/8
(electromotion)
Between 100"(2.5 m) and 600"(15 m) when separate zoom lens is fitted
Between 100"(2.5 m) and 180"(4.5 m) when separate fixed focus lens is fitted
Between 100"(2.5 m) and 600"(15 m) when separate zoom lens is fitted
Between 100"(2.5 m) and 200"(5.0 m) when separate fixed focus lens is fitted
4:3 when separate zoom lens or fixed focus lens is fitted
5:4 when separate zoom lens or fixed focus lens is fitted
With ET-MD95RGB analog RGB input module (sold separately) installed
BNC termination
✕ 5
Video signal / Sync signal input block Impedance : 75 Ω/1 kΩ
R/P
R/Cr 0.7 V [p-p] , 1.0 V [p-p] with BETACAM input
G/Y 0.7 V [p-p]
(1.0 V [p-p] when SYNC ON G/Y signal is input)
B/PB/Cb 0.7 V [p-p] , 1.0 V [p-p] with BETACAM input
Composite sync 0.6 V [p-p] – 4.0 V [p-p] with 75 Ω
TTL level with 1 kΩ
Separate sync 0.6 V [p-p] – 4.0 V [p-p] with 75 Ω
TTL level with 1 kΩ
Analog RGB input signal
f
H:
15 kHz–100 kHz, fV: 24 Hz–120 Hz, dot clock frequency: 20 MHz–162 MHz
Color difference input signal
Applicable formats: 480i, 576i, 480p, 720/60p, 1080/60i(1035/60i)
1080/50i, 1080/30p, 1080/25p, 1080/24p, 1080/24sF
With ET-MD95VM2 video signal (NTSC, NTSC4.43, PAL, SECAM,
PAL-M, PAL60, PAL-N) input module (sold separately) installed
Video signal 1.0 V [p-p] Impedance: 75 Ω BNC termination
Y signal 1.0 V [p-p] Impedance: 75 Ω BNC termination
C signal 0.286 V [p-p] Impedance: 75 Ω BNC termination
C
b signal 0.7 V [p-p] Impedance: 75 Ω BNC termination
C
r signal 0.7 V [p-p] Impedance: 75 Ω BNC termination
Power Supply
Power
Consumption
Operating
environment
temperature
Storage environment
DMD
TM
elements
Lamp
Luminosity
Projection method
Keystone compensation
Optical axis shift
volume
Projection screen size
Screen aspect ratio
Input signals