Filter
Top Products
Connecting the input module signal source
Connecting the signal source to the input module for analog RGB signals
If using the input module for analog RGB signals in order to connect the projector to a personal computer, you will
also need to use a separate interface (D-SUB /BNC) cable.
1.Connecting an analog RGB signal source
2.Connecting a component signal source
R/P
R
G/Y
RG B
H/H
·
V
V
B/P
B
H/H
·
VV
D-SUB /BNC
Personal computer
RGB
s
i
gna
l
i
nput mo
d
u
l
e
(
so
ld
separate
l
y
)
ET-MD95RGB
RGB Module
ET-MD95RGB
CAUTION:
• Ternary synchronization signals cannot be input to the
H/H
•
V and V terminals.
• Do not input synchronization signals to the H/H
•
V and V
terminals when SYNC ON GREEN signals are being input.
( "C" means "composite sync" in H/H
•
V)
PR/Cr
YPB/Cb
High-definition VCR
DVD player
R/P
R
G/Y B/P
B
H/H
·
VV
PB/Cb
Y
P
R/Cr
RGB Module
ET-MD95RGB
RGB signal input module (sold separately)
ET-MD95RGB
(Purchase adapter cable locally)
Note:
• Connect either the VCR or DVD player
using three BNC cable.
Three BNC-to-RCA adaptors may be
required at the DVD player.
31