Filter
Top Products
55
Adjusting the picture to the desired setting
The following procedures can be used to adjust the picture to the desire appearance.
Adjustment procedure ... Adjusting the COLOR setting
Press the MENU button. ... The MENU screen will be displayed.
Press the UP ( ) and DOWN ( ) arrow buttons to select PICTURE.
Press the ENTER button. ... The PICTURE screen will be displayed.
Press the UP ( ) and DOWN ( ) arrow buttons to select COLOR.
Press the ENTER button. ... The COLOR individual adjustment screen will be
displayed.
Use the control level buttons ( + and − ) to adjust the COLOR setting level.
*1.The functions of the LEFT ( ) and RIGHT ( ) arrow buttons change
depending on the adjustment item selected. Refer to the table below for details.
If you would like to adjust the BRIGHT, CONTRAST and TINT settings, repeat
steps , and .
*2.If adjusting the BRIGHT and CONTRAST settings, the individual adjustment
screens can be displayed by pressing the respective buttons on the remote
control unit.
• If approximately five seconds pass without any buttons being pressed while an individual adjustment
screen is being displyed, the display will return to the PICTURE screen.
COLOR
TINT
BRIGHT
CONTRAST
Adjustment Item
Operation Adjustment Details
Adjustment Range
Remarks
Press the [+] button.
Press the [−] button.
Press the [+] button.
Press the [−] button.
Press the [+] button.
Press the [−] button.
Press the [+] button.
Press the [−] button.
The color becomes pastel.
The color becomes more intense.
Flesh tones become greenish.
Flesh tones become reddish.
The screen becomes brighter.
The screen becomes darker.
The bright areas become brighter.
The bright areas become darker.
Max. value 100
Min. value 0
Max. value 60
Min. value 0
Max. value 63
Min. value 0
Max. value 63
Min. value 0
NOTE