Filter
Top Products
Chapter 4 Settings — [PICTURE] menu
ENGLISH - 71
[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x page 65) for the operation of the menu screen.
f After selecting the item, press asqw to set.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.
1) Press as to select [PICTURE MODE].
2) Press the qw.
f The [PICTURE MODE] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[STANDARD] The image becomes suitable for moving images in general.
[CINEMA] The image becomes suitable for movie contents.
[NATURAL] The image is sRGB compliant.
[DICOM SIM.] The image becomes similar to that of DICOM Part 14 Grayscale Standard.
[DYNAMIC] The light output is maximized for use in bright areas.
[GRAPHIC] The image becomes suitable for input from the personal computer.
[USER] Set any desired picture mode.
Note
f The factory default picture mode is [GRAPHIC] for still image input signals and [STANDARD] for movie-based input signals.
f DICOM is an abbreviation of “Digital Imaging and Communication in Medicine” and is a standard for medical imaging devices. Although the
DICOM name is used, the projector is not a medical device, and should not be used for purposes such as diagnosis of display images.
f Press the <ENTER> button when each [PICTURE MODE] is selected to save as a specied value when a new signal is input. The data of
all items except [SYSTEM SELECTOR] in the [PICTURE] menu is saved.
f In the factory default settings, [USER] is set to images that comply with the ITU-R BT.709 standard.
Changing the [USER] name
1) Press as to select [PICTURE MODE].
2) Press qw to select [USER].
3) Press the <ENTER> button.
f The [PICTURE MODE] detailed screen is displayed.
4) Press as to select [PICTURE MODE NAME CHANGE], and press the <ENTER> button.
f The [PICTURE MODE NAME CHANGE] screen is displayed.
5) Press asqw to select the text, and press the <ENTER> button to enter the text.
6) Press asqw to select [OK], and press the <ENTER> button.
f The picture mode name is changed.
[CONTRAST]
You can adjust the contrast of the colors.
1) Press as to select [CONTRAST].