Read this rst!
6 - ENGLISH
Important
Information
CAUTION:
POWER
When disconnecting the power cord, be sure to hold the power plug and power connector.
Ifthepowercorditselfispulled,theleadwillbecomedamaged,andre,short-circuitsorseriouselectric
shocks will result.
When not using the projector for an extended period of time, disconnect the power plug from the wall
outlet and remove the batteries from the remote control.
Disconnect the power plug from the wall outlet before carrying out any cleaning and replacing the unit.
Electric shocks can result if this is not done.
WARNING:
ACCESSORIES
Do not use or handle the batteries improperly, and refer to the following.
Failuretoobservethiswillcauseburns,batteriestoleak,overheat,explodeorcatchre.
z
Donotuseunspeciedbatteries.
z
Do not disassemble dry cell batteries.
z
Donotheatthebatteriesorplacethemintowaterorre.
z
Do not allow the + and
-
terminals of the batteries to come into contact with metallic objects such as
necklaces or hairpins.
z
Do not store batteries together with metallic objects.
z
Store the batteries in a plastic bag and keep them away from metallic objects.
z
Make sure the polarities (+ and
-
) are correct when inserting the batteries.
z
Do not use a new battery together with an old battery or mix different types of batteries.
z
Do not use batteries with the outer cover peeling away or removed.
If the battery uid leaks, do not touch it with bare hands, and take the following measures if necessary.
z
Batteryuidonyourskinorclothingcouldresultinskininammationorinjury.
Rinse with clean water and seek medical advice immediately.
z
Batteryuidcomingincontactwithyoureyescouldresultinlossofsight.
In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately.
Do not disassemble the lamp unit.
If the lamp breaks, it could cause injury.
Lamp replacement
The lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents will
result.
z
The lamp can easily explode if struck against hard objects or dropped.
z
Before replacing the lamp, be sure to disconnect the power plug from the wall outlet.
Electric shocks or explosions can result if this is not done.
z
When replacing the lamp, turn the power off and allow the lamp it to cool for at least one hour before
handling it otherwise it can cause burns.
Do not allow infants or pets to touch the remote control unit.
z
Keep the remote control unit out of the reach of infants and pets after using it.
Do not use the supplied power cord with devices other than this projector.
z
Using the supplied power cord with devices other than this projector may cause short circuits or
overheating,andresultinelectricshockorre.
Remove the depleted batteries from the remote control promptly.
z
Leavingthemintheunitmayresultinuidleakage,overheating,orexplosionofthebatteries.