Filter
Top Products
[SIGNAL LIST] menu
68 - ENGLISH
Settings
Select [SIGNAL LIST] from the main menu.
Refer to
“
Navigating through the menu
”
(
page 41) regarding the operation of the menu
screen.
■ Registered signal status
z
The name can be set for each sub memory
(
page 69).
z
Memory number: A1 (1-2)
Sub memory number
When the address number (A1, A2, ... H7,
H8) is registered
Registering a signal to the list
After a new signal is input and the <MENU> button
on the remote control or the control panel is pressed,
the registration is completed and the [MAIN MENU]
screen is displayed.
Note
z
Up to 96 signals including the sub memories can
be registered to the projector.
z
There are 12 pages (eight memories of A
through
L, with eight memories possible on each page) for
memory numbers, and it is registered to the lowest
number that is available. If there is no available
memory number it will be overwritten from the
oldest signal.
z
The registration names are automatically
determined by the input signals and the memory
numbers.
z
If a menu is being displayed, the new signals will
be registered at the instant they are input.
Renaming the registered data
1) Press
▲▼
◀▶ to select the signal to
display the details.
2) Press the <ENTER> button.
z
The [REGISTERED SIGNAL STATUS] screen
is displayed.
z
The name, memory number, input terminal,
frequency, synchronization signal, etc., of the
input signal are displayed.
z
Press the <MENU> button to return to the
[REGISTERED SIGNAL LIST] screen.
3) Press the <ENTER> button.
z
The [RENAME] screen is displayed.
4) Press
▲▼
◀▶ to select a character to
input and press the <ENTER> button
to enter the character.
5) After changing the name, press
▲▼
◀▶ to select [OK], and press the
<ENTER> button.
z
The registration is completed and it will return to
the [REGISTERED SIGNAL STATUS] screen.
z
If you press to select [CANCEL] and
press the <ENTER> button, the changed signal
name will not be registered and keep the signal
name that was automatically registered.
Deleting a registered data
1) Press
▲▼
◀▶ to select the signal to
delete.
2) Press the <DEFAULT> button.
z
The [ENTRY SIGNAL CLEAR] screen is
displayed.
z
To cancel the deletion, press the <MENU>
button to return to the [REGISTERED SIGNAL
LIST] screen.
3) Press the <ENTER> button.
z
The selected signal will be deleted.
[SIGNAL LIST] menu